Power Electronics & Induction Motor Control A-Z with MATLAB
Master power electronics & drives using MATLAB/Simulink. Learn rectifiers, inverters, & motor control – a step-by-step guide.
Course Content
Power Electronics & Induction Motor Control A-Z with MATLAB is an all-levels Udemy course taught by Vedicskill Edu Tech. It runs 12h 29m, is taught in English, and includes a certificate of completion. Learners rate it 3.8 out of 5 from 3 reviews, with 11 students enrolled. It is a paid course, first published October 2025.
Master AC Drives and Power Electronics with MATLAB/Simulink
Unlock the power of power electronics and AC drives with this practical, hands-on course! Learn to design, simulate, and analyze AC drive systems using MATLAB/Simulink and the Simscape Power Systems library. This course takes you from fundamental concepts to building and testing real-world applications through step-by-step simulations and projects.
What You'll Learn:
- Fundamentals of Power Electronics: Understand the core principles behind AC drives and power conversion techniques.
- MATLAB/Simulink Expertise: Develop proficiency in using MATLAB/Simulink and Simscape for modeling, simulation, and analysis of power electronic circuits.
- AC Drive System Design: Learn to design and control various AC drive systems for precise motor control.
- Hands-on Projects: Apply your knowledge through two practical projects: automatic DC voltage control and automatic AC voltage control.
Course Structure: A Step-by-Step Approach
Each module follows a consistent, effective learning process:
- Concept Explanation: Clear, concise explanations of device functionality and applications.
- Equation Derivation: Derivation of essential equations, focusing on simplicity and relevance.
- Simulink/Simscape Modeling: Step-by-step construction of circuits and systems in Simulink/Simscape.
- Simulation & Measurement: Simulate system behavior, measure key parameters (voltage, current) using scopes and virtual meters.
- Result Analysis: Analyze simulation results, including ripple, RMS, average, and harmonic content.
- Design Optimization: Improve system performance by adding filters, modifying switching strategies, and implementing control techniques.
- Practice Exercises: Reinforce learning with short, targeted exercises after each topic.
Module Breakdown:
Module 1: Introduction to MATLAB/Simulink
- Simulink Interface: Navigate the Simulink environment and run simulations.
- Simscape Power Systems: Explore the Simscape library for power electronics components.
- Basic Circuit Modeling: Build and simulate simple electric circuits (resistors, sources, scopes).
- Signal Measurement: Learn to measure voltage and current signals within Simulink.
- Practice Example: Integrate concepts to create a complete simulation.
- Key Takeaway: Gain confidence in creating models, placing meters, running simulations, and saving results.
Module 2: Rectifiers (DC Conversion)
- Uncontrolled Rectifiers: Understand and simulate half-wave and full-wave rectifiers.
- Three-Phase Rectifiers: Model and analyze 3-phase diode rectifiers.
- Measurements & Signal Analysis: Calculate RMS and average values, and understand ripple characteristics.
- Filtering Techniques: Implement and compare capacitor (C) filters, inductor (L) filters, and LC/π filters.
- Thyristor (SCR) Controlled Rectifiers: Design and simulate half-wave and full-bridge controlled rectifiers.
- Load Analysis: Analyze output waveforms for resistive (R) and inductive (RL) loads.
- Mini Project: Automatic DC Voltage Control of Single-Phase Rectifier – design and simulate a controller (PI or firing-angle logic) to regulate DC voltage under varying load conditions.
Module 3: Inverters (DC to AC Conversion)
- Switching Devices: Explore IGBTs, diodes, MOSFETs, and their switching characteristics.
- Pulse Generation: Design pulse generators for safe and effective switching control.
- Inverter Topologies: Model and analyze half-bridge and full-bridge inverters.
- Pulse Width Modulation (PWM): Understand and implement sinusoidal PWM (SPWM) and other PWM techniques.
- Three-Phase Inverters: Model and simulate three-phase inverters, analyzing line and phase voltages.
- Mini Project: Automatic AC Voltage Control of Three-Phase Inverter – implement PWM control and design a closed-loop PI controller to regulate output amplitude under load.
Module 4: AC Drives (Motor Control)
- Induction Motor Basics: Understand the construction, torque-speed characteristics, and load effects.
- Stator Voltage Control: Learn to control motor speed by adjusting stator voltage.
- Frequency-Based Speed Control: Explore the relationship between frequency and motor speed.
- V/f Control: Implement and test V/f control for maintaining constant flux and speed regulation.
- Simulation & Tuning: Simulate motor behavior with inverters, tune
Need a web app built? Hire the team behind TutorialSearch.io
We ship fast, production-grade full-stack apps (Next.js, React, edge infra) — the same stack that powers this site.