Udemybeginnerar

القياسات الكهربية الصناعية

Learn about electrical measuring instruments. Explore their uses, types, and applications in various fields. Perfect for students and professionals.

4.4(3)
10students
48m
Certificate
م محمد الشرقاوى
م محمد الشرقاوىمهندس تحكم و ألات كهربية

Course Content

القياسات الكهربية الصناعية is a beginner-level Udemy course taught by م محمد الشرقاوى. It runs 48m, is taught in Arabic, and includes a certificate of completion. Learners rate it 4.4 out of 5 from 3 reviews, with 10 students enrolled. It is a paid course, first published November 2024.

Mastering Electrical Measurements: A Comprehensive Guide for Troubleshooting

This course equips you with the essential skills to confidently understand and utilize various electrical measuring instruments. Learn to accurately measure AC and DC current, voltage, resistance, insulation, temperature, frequency (Hertz), conductivity, diodes, transistors, and capacitors – empowering you to diagnose and resolve electrical faults with precision.

Understanding Voltage & Current Indicators

  • Voltage (V): Indicates potential difference. Look for the letter "V" or a dotted line (representing AC) or solid line/ dashes (representing DC).
  • Current (A): Measured in Amperes. AC current is denoted by symbols like A~, ACA, and AAC. DC current is indicated by A–, DCA, and ADC.
  • Resistance (Ω): Measured in Ohms, symbolized by the Greek letter Omega (Ω). Sometimes represented by "R" on older meters.

Setting Up Your Multimeter for Accurate Readings

  1. Select Voltage Type: Choose between measuring AC voltage (V~) or DC voltage (V–/DCV/VAC).
  2. Choose Current Measurement: Select the appropriate current setting (A), specifying whether it's AC or DC. Note: Analog meters typically cannot measure current directly.
  3. Find the Resistance Setting: Locate the resistance setting (Ω), indicated by the Omega symbol.
  4. Utilize DC+ and DC-: If available, use the DC+ setting for direct current measurements. If you suspect reversed polarity, switch to DC- to avoid damaging the meter.
  5. Decoding Additional Symbols: Familiarize yourself with common symbols for advanced measurements. Refer to troubleshooting guides for detailed explanations.

Advanced Measurement Functions

  • Continuity Test: Look for symbols like ))) to perform a continuity test. The meter will beep if a closed circuit is detected.
  • Diode Test: A triangle with a cross in the middle indicates a diode test, verifying one-way current flow.
  • Frequency (Hz): The Hz symbol measures the frequency of AC circuits.
  • Capacitance Test: The –|(– symbol indicates capacitance testing.

Multimeter Terminals: Connecting for Success

Most multimeters have three terminals.

  • COM (Common): Always connect the black wire to the COM (ground) terminal.
  • Voltage/Resistance: Connect the red wire to the terminal indicated as lower current (often mA) when measuring voltage or resistance.
  • Current: Connect the red wire to the appropriate terminal based on the expected current. Common ranges include 200mA (for low current circuits) and 10A (for high current circuits).

By mastering these techniques, you'll be well-equipped to troubleshoot electrical problems effectively and safely.

$ whoami — the devs behind tutorialsearch.io

Hire the developers behind TutorialSearch.io

We built this site — full-stack web apps, AI integration & automation. Tell us what you need and we'll build yours.