Especialización En Ingeniería Estructural En Acero. Módulo 1
Learn about special moment frames (Pórticos Especiales a Momento) and SMF design. Structural engineering course.
Course Content
Especialización En Ingeniería Estructural En Acero. Módulo 1 is an all-levels Udemy course taught by Juan Carlos Orozco Montoya. It runs 52m and is taught in Spanish. Learners rate it 4.8 out of 5 from 14 reviews, with 67 students enrolled. It is free to enroll, last updated October 2023.
Understanding Flexure and Shear in Steel Members (ANSI/AISC360-16)
This module dives deep into the critical aspects of flexure and shear in steel members, aligning with the latest ANSI/AISC360-16 standards. A thorough understanding of these concepts is essential for structural engineers and anyone working with steel construction.
What is Flexure?
Flexure, or bending, occurs when a member experiences loads perpendicular to its axis. These loads, which can include concentrated moments applied along the span or at the ends of the element, induce bending moments and shear forces within the member. The resistance of a steel beam to flexure is primarily determined by its moment of inertia (I).
Factors Affecting Flexural Resistance:
- Support Conditions: The way a beam is supported significantly impacts its flexural capacity. Continuous beams, compared to simply supported beams, generally exhibit increased resistance.
- Lateral Torsional Buckling: A major concern is lateral torsional buckling. This phenomenon can drastically reduce a beam's strength if not properly addressed.
Local Buckling Considerations:
Beyond overall flexural capacity, it's crucial to consider local buckling which can lead to premature failure.
- Local Buckling of Flanges (Flap Buckling): During bending, if the compression flange is too thin, it can buckle or become unstable, preventing the beam from reaching its full plastic moment capacity.
- Web Panel Failure: Concentrated loads and support locations can cause web panel buckling due to crushing, localized buckling near the load point (where transverse deformations are concentrated), or buckling between the flanges.
Lateral-Torsional Buckling Explained:
Lateral-torsional buckling is a complex failure mode that affects beams lacking adequate lateral bracing. It occurs when the beam's resistance to torsion and its moment of inertia about the axis with the smaller value are insufficient compared to the axis with the larger value. This can lead to catastrophic failure, even if the beam's flexural capacity is still available. Proper bracing is essential to prevent this type of failure.
Hire the developers behind TutorialSearch.io
We built this site — full-stack web apps, AI integration & automation. Tell us what you need and we'll build yours.