EdgeTX Masterclass: Unleash Every Feature of Your Transmitte
Learn FPV drone building! Explore drone theory, radio transmitters, firmware & get hands-on experience. Start your drone journey today.
Course Content
EdgeTX Masterclass: Unleash Every Feature of Your Transmitte is an all-levels Udemy course taught by Yurii Bobyr. It runs 1h 33m, is taught in English, and includes a certificate of completion. It is a paid course, first published October 2025.
EdgeTX Radio Transmitter Mastery: A Comprehensive Guide
Course Overview: Unlock the Full Potential of Your EdgeTX Radio
This video course is the ultimate resource for anyone wanting to master every aspect of their radio transmitter running on EdgeTX firmware. We'll delve into every setting, function, and feature, empowering you to personalize your radio for optimal performance and control. Learn how to configure your radio for FPV drones, racing, and training, and explore advanced features to enhance your flying experience.
Course Content:
Lesson 1: Safe EdgeTX Update: Full Guide (Backup & 2 Flashing Methods)
- Why Update? Discover the benefits of the latest EdgeTX versions over older firmware.
- Backup Your Settings: Learn how to create a complete backup of your radio configuration.
- Flashing Methods: Master both online (USB) and offline (SD card) methods for safe and reliable firmware updates.
Lesson 2: EdgeTX Radio Stick Calibration
- Calibration Importance: Understand why proper stick calibration is crucial for safe and precise flight.
- Channels Monitor: Use the "Channels Monitor" to identify and correct calibration inaccuracies.
- Calibration Technique: Learn the correct calibration procedure, including proper stick movement and pressure.
- Verification Methods: Explore advanced calibration techniques like corner testing and smooth movement checks.
Lesson 3: EdgeTX Model Setup: From Blank Slate to Flight-Ready!
- Creating Models: Learn to create separate profiles for each of your drones.
- Timer Configuration: Utilize the timer function for accurate flight time monitoring.
- Trim Setup: Properly configure or disable trims to prevent accidental adjustments.
- Safety Checks: Set up pre-flight safety checks to prevent dangerous takeoffs.
- Radio Module Configuration: Choose the correct communication protocol (CRSF, ELRS) or disable for simulators.
Lesson 4: RF Module Configuration (Internal & External)
- Baud Rate Explained: Understand the impact of baud rate on latency and range.
- Packet Rate Deep Dive: Learn how packet rate affects smoothness for racing vs. long-range flying.
- Internal vs. External Modules: Determine when and why to use an external RF module.
- Channel Range & Receiver Number: Understand these settings for optimal signal performance.
Lesson 5: Trainer Mode in EdgeTX: Training and Joint Control
- Master/Slave Concept: Learn how to connect and control a student radio.
- Cable Connection: Establish a physical connection between radios using the Trainer port.
- Switch Configuration: Assign a dedicated switch for seamless control transfer.
- Training Process: Master the art of safe and effective training with instant control transfer.
Lesson 6: Flight Modes in EdgeTX – Configuration for FPV Drones
- Disable Trims: Learn why disabling trims is often preferred for FPV flying.
- Physical Trim Adjustment: Understand how to physically set your trims to the center position.
- FM0 Menu Configuration: Deactivate trims in the FM0 menu for added safety.
Lesson 7: EdgeTX Inputs Configuration
- Assigning Controls: Link physical controls (sticks, switches, buttons) to software inputs.
- Key Input Parameters: Master Source, Weight (Rates), Offset, and Curve types.
- Rates & Expo: Fine-tune stick sensitivity for precise maneuvers and aggressive flying.
- Advanced Capabilities: Utilize Mode and Switch to activate inputs in specific flight modes.
Lesson 8: Mixes Configuration – Final Stage of Channel Setup
- Understanding Mixes: Learn the crucial role of the "Mixes" menu in activating inputs.
- Core Parameters: Review Source, Weight, Offset, and Curve settings.
- Unique Mixes Functions: Explore Trim, Multiplex (Add, Multiply, Replace), and Warning functions.
- Verification: Use the "Mixers Monitor" to ensure proper channel configuration.
Lesson 9: Final Channel Configuration (Outputs)
- Gimbal Centering: Perfectly center your gimbals using Subtrim.
- Safety Limits: Set Min/Max values to protect your hardware.
- Channel Inversion: Instantly invert any channel direction.
Lesson 10: "Curves" Setup: Your Key to Smooth Control
- Custom Curves: Create custom curves (exponential) for smoother control.
- Eliminate Twitchiness: Reduce unwanted movements and accidental inputs.
- Fine-Tune Sensitivity: Dial in the perfect sensitivity for your flying style.
Lesson 11: Special Functions in EdgeTX – Personalizing Your RС
- **Assigning
Need a web app built? Hire the team behind TutorialSearch.io
We ship fast, production-grade full-stack apps (Next.js, React, edge infra) — the same stack that powers this site.