Udemyallen

5G RF Planning and Design

Master 5G network planning! Learn 5G coverage, capacity, beamforming, and PCI/PRACH optimization. Enhance your 5G expertise.

4.5(471)
1,920students
3h 23m
Certificate
Dr. Moazzam Tiwana
Dr. Moazzam TiwanaAssistant Professor/Telecom Engineer

Course Content

5G RF Planning and Design is an all-levels Udemy course taught by Dr. Moazzam Tiwana. It runs 3h 23m, is taught in English, and includes a certificate of completion. Learners rate it 4.5 out of 5 from 471 reviews, with 1,920 students enrolled. It is a paid course, last updated October 2025.

Mastering 5G NR RF Planning: A Comprehensive Guide

Navigate the complexities of 5G New Radio (NR) radio frequency (RF) planning with this in-depth course. 5G RF planning presents unique challenges compared to legacy networks, driven by advanced technologies like mmWave frequencies, flexible numerology, and Massive MIMO (M-MIMO). This course provides the technical expertise needed for successful RF network planning in both mid-band and mmWave spectrum deployments. Learn to optimize both coverage and capacity for your 5G network.

Course Modules:

1. Introduction to 5G Planning

  • 5G Frequency Bands: Understand the spectrum landscape for 5G deployments.
  • Most Popular 5G Bands for Deployment: Explore the most commonly used frequencies for 5G.
  • Subcarrier Spacing vs. Cell Size: Learn the relationship between these critical parameters.
  • 5G FDD & TDD Modes: Compare and contrast Frequency Division Duplexing (FDD) and Time Division Duplexing (TDD) modes.
  • SUL & SDL: Understand the specifics of Subband Uplink and Downlink.
  • Frequency Bands Advantages of TDD Deployment: Discover the benefits of TDD deployments.
  • Steps in 5G Cellular RF Planning: A structured approach to planning.

2. 5G Radio Access Network (RAN) Dimensioning

  • Coverage Dimensioning: Planning for optimal signal reach.
  • Path Loss and Propagation Path Loss Models: A deep dive into path loss concepts and models.
  • 3GPP Propagation Models: Explore industry-standard models:
    • RMa (Rural Macro)
    • UMa (Urban Macro)
    • UMi (Urban Micro)
  • Propagation Models Before 5G: Review historical models:
    • Okumara-Hata Model
    • Walfisch Ikegami
    • Sakagami Kuboi Models
  • Selection Criteria for PL Model: Choosing the right path loss model.
  • Maximum Allowable Path Loss (MAPL): Understanding and calculating MAPL.
  • Cell Area, Intersite Distance, and Required Number of Cells Calculation: Practical calculations for cell planning.
  • Link Budget Equation: Mastering the link budget calculation.
  • Factors Affecting Link Budget: A comprehensive breakdown:
    • Building Penetration Loss
    • Foliage (Vegetation) Loss
    • Rain Fade Margin
    • Body Block Loss
    • Interference Margin
    • Shadow Fading Margin (SFM) and Location Probability
  • Shadow Fading Margin Vs Cell Size: Understanding the relationship.
  • Shadow Fading Standard Deviation Values for Propagation Models & SFM Calculation: Accurate SFM calculations.
  • Effect of Active Antenna Unit (AAU) on Link Budget: Impact of AAU on link performance.
  • Capacity Dimensioning: Planning for network capacity.
  • Traffic Model and KPIs for Capacity Dimensioning: Understanding traffic patterns and key performance indicators.
  • Capacity Dimensioning Calculation: Methods for calculating network capacity.

3. Propagation Model Tuning

  • Propagation Model Tuning Steps: A systematic approach to model validation.
  • Drive Test Preparation and Procedure: Preparing for and conducting drive tests.
  • Drive Test Measurements: Collecting accurate drive test data.
  • The Standard Propagation Model Used in Model Tuning: Understanding the model being tuned.
  • Setting K1 and K2 Coefficients: Optimizing model parameters.
  • Diffraction Loss Multiplier Coefficient K4: Understanding and applying K4.
  • Clutter Loss Coefficient K_clutter: Accounting for clutter effects.
  • Measuring Goodness of Model Tuning: Evaluating model accuracy.
  • Model Tuning Example from Atoll RF Planning Tool: A practical example using industry-standard tools.

4. Nominal (Detailed Simulation) Planning

  • Inputs & Outputs of 5G Coverage Planning Simulation: Understanding simulation requirements and results.
  • 3D Ray Tracing: Using ray tracing for accurate coverage prediction.
  • Electronic Maps for RF Planning and Their Basic Formats: Utilizing electronic maps for planning.
  • 3D Electronic Map Types:
    • DTM (Digital Terrain Model)
    • *DLU (Digital
$ whoami — the devs behind tutorialsearch.io

Hire the developers behind TutorialSearch.io

We built this site — full-stack web apps, AI integration & automation. Tell us what you need and we'll build yours.